See What Saab 9-3 Key Replacement Tricks The Celebs Are Utilizing

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique procedure to add the second key. It requires dealer assistance using an electronic handheld computer called Tech-2. A new key and transponder need to be bought and then programmed to the car.

Rotate your keys to stop one from wearing out faster than the next. This will also ensure that your keys remain in top shape.

Replacement Case

Contrary to the classic saab 93 key fob keys of the past keys, the new key fobs are equipped with electronics which makes it hard to make a copy. This has made theft of cars considerably more difficult than it was years ago. However, it also has made replacing lost keys a more expensive task.

Every owner of a saab 9-3 key replacement 9-3 must have at least two functioning keys. If one gets lost, it is expensive to get another one for the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers will typically charge $100-$200 to do this.

There are several ways to get around these costly. Some parts retailers can look up the code from an extra key (usually the same one that opens the doors and turns the ignition) and cut a new key blade out of metal for only a fraction of the dealer's cost. The key must be the exact same as the original in order for it to work in your vehicle.

Follow these steps to replace the case. You'll require a flathead screwdriver and some patience. With the screwdriver you can pull off the plastic and then remove the emergency key. When the case is opened take the electronics out and place them in the new case. Make sure to insert the correct key and badge back inside the case, too.

Replacement Battery

The Saab 9-3 replacement battery is a low-cost part that can be quickly and easily replaced. The YouTube video of Cyclone Cyd demonstrates how you can replace the battery of the remote fob with just four easy steps. This tutorial is compatible with any modern Saab key fob. However, the process may differ slightly.

The first step is to locate the button that releases the backup key inside the fob. The button is usually found on the back of your fob right next to the Saab Logo. Then take a flathead screwdriver into the small hole of this button. This should be enough to open the fob case in order to change the battery.

After you have installed the new batteries CR1632, it is possible to put back together your remote key fob. Then, you can program it into your car. The entire process shouldn't take more than an hour. This is a straightforward procedure that doesn't require special tools.

The process is a bit more complicated if you lose your key, but still possible. The dealer must first read the VIN of the vehicle and then order an additional TWICE module and key blade that is matched to the unique code. The dealer will then have to program the key using MDI which is a new software tool.

Key Replacement Fob

The key fob has batteries that are used to lock and unlock your vehicle. The batteries last for a period of that is a long time, and they eventually fail. This is a typical issue that occurs with all vehicles and the good news is that you can change the batteries in a majority of key fobs without having to replace the entire case. Amazon sells replacement fobs with all the electronics in place. It is easy to open the case and replace the batteries. You'll need to remove the emergency key before you replace the batteries. To do this, place a small screwdriver that is flat into the slot in the middle of the. Move the screwdriver around the case, and it will split open, making it easier to remove.

When you're ready to replace the keys ensure you have a spare, as this will reduce the total cost by a significant amount. If you have a spare you can ask the dealer to cut an entirely new key and then program it to your car, which is cheaper than replacing the entire key fob.

If you do not have a spare key one, you can add an additional key to your car, however it requires a lot of research and effort. A second key can cost a few hundred dollars, and it requires programming of the car's computer. Professionals can accomplish this however, it's a costly option.

Replacement Ignition

Contrary to the earlier Saab automobiles, the new SAAB 9-3 models are equipped with an upgraded alarm system that is built around a coded key. This means that when you lose your sole working key, acquiring an additional one could be extremely expensive since the car has to have a computer module added and it also needs to be specifically programmed to accept an extra key. Most locksmiths cannot do this and even dealers can charge several hundred dollars just to program the new key!

If you've lost saab key your only working key the dealer will replace your car's computer (known as the CIM or SAAB TWICE) to make the replacement, and will charge top dollar for it. Instead, we can reprogram the EEPROM on your existing car computer to allow it to be programmed for a replacement key, which will save you more than 50% of the amount you have to pay at a dealership.

If you've owned a saab 9-3 replacement key 9-3 for many years, you know that the ignition keys aren't very durable. If your ignition key is not functioning properly, it is time to think about replacing it. They can become sticky and the buttons can fall off. It's not so difficult as it may seem to replace the ignition key. With the proper tools, it can be accomplished in a matter of minutes.